GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2000 🢒 Regal 🢒 Steering 🢒 Steering Wheel and Column - Tilt 🢒 Turn Signal Switch Does Not Cancel

Turn Signal Switch Does Not Cancel for Buick Regal 2000

Problem

Action

The cancel cam is worn.

Replace the cancel cam. Refer to Steering Column Tilt Head Housing - Disassemble - Off Vehicle or Steering Column Tilt Head Housing - Assemble - Off Vehicle .

The detent spring exhibits one of the following conditions:

    • Broken
    • Missing
    • Out of position
  1. Adjust the spring.
  2. Replace the components as needed. Refer to Steering Column Tilt Head Housing - Disassemble - Off Vehicle or Steering Column Tilt Head Housing - Assemble - Off Vehicle .

The return spring exhibits one of the following conditions:

    • Broken
    • Missing
    • Out of position
    • Adjust the spring as needed.

The cancel spring exhibits one of the following conditions:

    • Broken
    • Missing
    • Out of position
  1. Adjust the spring as needed.
  2. Replace the components as needed. Refer to Steering Column Tilt Head Housing - Disassemble - Off Vehicle or Steering Column Tilt Head Housing - Assemble - Off Vehicle .

The multifunction turn signal switch mounting screws are loose.

Tighten the multifunction turn signal switch screws. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle .

The following components are broken:

    • The switch
    • The anchor bosses

Replace the multifunction turn signal switch. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle .