Headlamp Leveling Rear Suspension Height Sensor Replacement for Cadillac CTS 2003

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the right rear tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .



3. Disconnect electrical connector (2).
4. Disconnect the ball and socket (3) from vehicle.
5. Remove the bolt (1) from the sensor.
6. Remove the sensor from the vehicle.

1. Position the sensor (3) to the vehicle.
2. Install the bolt (1) to secure the sensor (4) to the vehicle.

Tighten
Tighten the bolt to 9 N·m (80 lb in).

3. Install ball and socket (3) to sensor (4).
4. Connect electrical connector (2) to the sensor (4).
5. Install the right tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
6. Lower the vehicle.