Air Cleaner Assembly Replacement for Cadillac CTS 2008
Callout
| Component Name
|
Preliminary Procedures
- Remove the sight shield. Refer to
Front Compartment Side Sight Shield Replacement.
- Remove the air cleaner duct. Refer to
Air Cleaner Outlet Duct Replacement.
- Disconnect the MAF/IAT sensor electrical connector.
|
1
| Bolt
Notice: Refer to Fastener Notice in the Preface section.
Tighten 9 N·m (80 lb in) |
2
| Air Cleaner Assembly
Procedure
- Disconnect the electrical connector.
- Tilt the assembly rear upward while disengaging the air cleaner isolator.
|