For 1990-2009 cars only

Makes 🢒 Cadillac 🢒 2008 🢒 DTS 🢒 Power and Signal Distribution 🢒 Data Communications 🢒 Cruise Control Module with Distance Sensing Scan Tool Information

Cruise Control Module with Distance Sensing Scan Tool Information for Cadillac DTS 2008

Cruise Control Module with Distance Sensing Scan Tool Parameters

Parameter	System State	Expected Value	Description
Operating Conditions: The ignition is ON / The engine is OFF / Vehicle is in Park or Neutral / Cruise On / Off Switch is Turned OFF
Clean Radar Indicator Message	--	Off	The scan tool displays On / Off. This is the state of the clean radar indicator message as commanded by the distance sensing cruise control (DSCC) module.
Cruise On / Off Switch	--	Active	The scan tool displays On / Off. This is the state of the cruise control On/Off switch as detected by the ECM.
Driver Throttle Override Status	--	Inactive	The scan tool displays Active / Inactive. The ECM monitors the throttle and reports a throttle override condition initiated by the driver.
Service Radar Indicator Message	--	Off	The scan tool displays On / Off. This is the state of the service radar indicator as commanded by the DSCC module.
Target Found this Ignition Cycle	--	No	The scan tool displays Yes / No. The radar scans the road environment to detect the presence of a vehicle in its path. Yes is displayed if a target is acquired.
Vehicle Ahead Indicator Message	--	Off	The scan tool displays On / Off. This is the state of the vehicle ahead indicator as commanded by the DSCC module.