Rear Wheel Steering Mode Switch Replacement for Cadillac Escalade 2003

1. Remove the dash trim bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gages and Console.



2. Grasp the rear wheel steering mode switch housing (2) and pull outward to remove the switch assembly.
3. Disconnect the electrical connector (3) from the rear wheel steering mode switch.
4. Remove the rear wheel steering mode switch assembly (1) from the vehicle.

1. Reconnect the rear wheel steering mode switch (3) electrical connectors.



2. Install the rear wheel steering mode switch  (1) into the dash.
3. Reinstall the dash trim bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gages and Console.