For 1990-2009 cars only

Makes 🢒 Cadillac 🢒 2009 🢒 SRX 🢒 Diagnostic Navigation 🢒 Programming and Setup 🢒 Electronic Brake Control Module Programming and Setup

Electronic Brake Control Module Programming and Setup for Cadillac SRX 2009

If the electronic brake control module (EBCM) is replaced, the following procedures must be performed:

•	Program the EBCM. Refer to Service Programming System (SPS).

•	Recalibrate the brake pedal position (BPP) sensor. Refer to Brake Pedal Position Sensor Calibration.

If the EBCM needs to be reprogrammed, refer to Service Programming System (SPS) .