Radio Speaker Amplifier Replacement for Cadillac STS 2006

1. Remove the rear compartment trim. Refer to Rear Compartment Trim Panel Replacement in Body Rear End.



2. Remove the bolts securing the amplifier to the vehicle.
3. Disconnect the electrical connectors.
4. Remove the amplifier.

1. Connect the electrical connectors.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the bolts securing the amplifier to the vehicle.

Tighten
Tighten the bolts (1) to 9 N·m (80 lb in).

3. Install the rear compartment trim. Refer to Rear Compartment Trim Panel Replacement in Body Rear End.
4. Refer to Control Module References for programming and setup information.