Electronic Suspension Control Module Programming and Setup for Cadillac STS 2007
ESCM Replacement
If the electronic suspension control module (ESCM) is replaced, the procedures must be performed in the following order:
- ESCM programming--Refer to Service Programming System (SPS) .
- Trimset procedure. Ignition ON, using a scan tool follow the on screen instructions under special functions.
Important: The vehicle must be at correct trim height and on a level surface before performing trimset procedure. Refer to Trim Height Inspection .
ESCM Reprogramming
If the ESCM is reprogrammed, the procedures must be performed in the following order:
- ESCM programming--Refer to Service Programming System (SPS) .
- Trimset procedure. Ignition ON, using a scan tool follow the on screen instructions under special functions.
Important: The vehicle must be at correct trim height and on a level surface before performing trimset procedure. Refer to Trim Height Inspection .
Suspension Position Sensor Replacement
If a position sensor is replaced, the following must be performed:
Important: The vehicle must be at correct trim height and on a level surface before performing trimset procedure. Refer to Trim Height Inspection .
Trimset procedure. Ignition ON, using a scan tool follow the on screen instructions under special functions.
