Crankshaft Position Sensor Replacement for Cadillac STS 2009

1. Turn the ignition OFF.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.



3. Remove the exhaust manifold heat shield to obtain access.



4. Disconnect the crankshaft position (CKP) electrical connector (3).



5. Remove the crankshaft sensor bolt.
6. Remove the crankshaft sensor.

1. Install the crankshaft position sensor.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the crankshaft position sensor bolt and tighten to 10 N·m (89 lb in).



3. Connect the CKP electrical connector (3).



4. Install the exhaust manifold heat shield and tighten to 10 N·m (89 lb in).
5. Lower the vehicle.