Remote Control Door Lock Receiver Replacement for Cadillac Seville 1999

1. Remove the rear shelf trim from inside of the rear storage compartment. Refer to Rear Compartment Trim Panel Replacement in Body Rear End.
2. Push on the retainer at the rear edge of the bracket and slide towards the driver's side.
3. Disconnect the electrical connectors from modules on the bracket.
4. Remove the RKE module (1) from the bracket (2).

1. Slide the RKE module (1) into the bracket (2).
2. Reconnect all the electrical connectors.
3. Install the bracket to the rear shelf.
4. Install the rear storage compartment trim. Refer to Rear Compartment Trim Panel Replacement in Body Rear End.
5. Program the RKE module. Refer to Transmitter Programming .