Steering Column Seal Replacement for Chevrolet Avalanche - 2WD 2008

1. Disconnect the steering shaft coupling from the upper intermediate steering shaft. Refer to Steering Shaft Coupling Replacement.
2. Remove the 3 steering column seal nuts (2).
3. Remove the steering column seal (1) from the vehicle.

1. Install the steering column seal (1) to the vehicle.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the 3 steering column seal nuts (2).

Tighten
Tighten the nuts to 3 N·m (27 lb in).

3. Connect the steering shaft coupling to the upper intermediate steering shaft. Refer to Steering Shaft Coupling Replacement.