Door Check Link Replacement for Chevrolet Avalanche - 4WD 2003

1. Open the door.
2. Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement .
3. Remove the water deflector. Refer to Front Side Door Water Deflector Replacement .



4. Remove the body-side check strap bolt.
5. Remove the check strap plug.
6. Remove the door-side check strap nuts.
7. Pull the check strap from the inside of the door.

1. Install the check strap to the door.
2. Install the check strap to the body.




Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Install the check strap nuts.

Tighten
Tighten the nuts to 9 N·m (80 lb in).

4. Install the check strap bolt.

Tighten
Tighten the bolt to 25 N·m (18 lb in).

5. Install the water deflector. Refer to Front Side Door Water Deflector Replacement .
6. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement .