Mode Valve Actuator Replacement for Chevrolet Aveo 2007

Caution: Refer to Battery Disconnect Caution in the Preface section.




1. Disconnect the negative battery cable.
2. Remove the instrument panel assembly. Refer to Instrument Panel Assembly Replacement.
3. Disconnect the electrical connector.
4. Remove the motor actuating rod by snapping out it out of the lever with needle-nose pliers.
5. Remove the motor retaining bolts.
6. Remove the mode door motor.

1. Install the mode door motor.
2. Install the motor retaining screws and tighten.
3. Install the actuating rod.
4. Connect the electrical connector.
5. Install the instrument panel assembly. Refer to Instrument Panel Assembly Replacement.
6. Connect the negative battery cable.