Transmitter Synchronization for Chevrolet Blazer - 2WD 1998
| • | Resynchronization may be necessary due to the security method
used by the remote keyless entry system. |
| | The transmitter does not send the same signal twice to the receiver. |
| • | The receiver will not respond to a signal that has been sent previously. |
| | This prevents anyone from recording and playing back the signal from
the transmitter. |
| • | Resynchronization may be necessary under the following conditions: |
| - | The battery in the transmitter is very weak. |
| - | The battery in the transmitter was replaced. |
| - | The battery in the vehicle has been in a low or no charge condition
for an extended period of time. |
| • | In order to resynchronize the transmitter with the receiver, perform
the following steps: |
| 1. | Stand within 1.5 meters (5 ft) from the vehicle. |
| 2. | Simultaneously press and hold the LOCK and UNLOCK buttons on the
transmitter for 7 seconds. |
The door locks should cycle in order to confirm synchronization.
