Engine Mount Strut Bracket Replacement for Chevrolet Cavalier 2002

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
2. Remove the right engine splash shield. Refer to Engine Splash Shield Replacement in Body Front End.
3. Remove the engine mount strut. Refer to Engine Mount Strut Replacement .



4. Remove the engine mount strut bracket bolts.
5. Remove the engine mount strut bracket.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

1. Install the engine mount strut bracket and the bolts.

Tighten
Tighten the engine mount strut bracket bolts to 66 N·m (49 lb ft).

2. Install the engine mount strut. Refer to Engine Mount Strut Replacement .
3. Install the right engine splash shield. Refer to Engine Splash Shield Replacement in Body Front End.
4. Lower the vehicle.