Driver or Passenger Seat Adjuster Switch Bezel Replacement for Chevrolet Chevy C Silverado - 2WD 1999

1. Remove the lumbar knob, if equipped. Refer to Lumbar Support Knob Replacement .



2. Remove the screws retaining the power seat switch bezel.
3. Transfer all the necessary components to the new seat switch bezel.

1. Install the seat switch bezel.
2. Connect the electrical connector.



3. Install the screws retaining the power seat switch bezel.

Tighten
Tighten the screws to 2 N·m (18 lb in).

4. Install the lumbar knob, if equipped. Refer to Lumbar Support Knob Replacement .