Automatic Transaxle - 4T40-E/4T45-E for Chevrolet Chevy K Silverado - 4WD (CNG) 2005

All Component Locator

• Automatic Transmission Electronic Component Views
• Component Location
• Disassembled Views
• Fluid Passages

All Description and Operation

• Drive Range, Manual First (from Drive, Manual Second)
• Drive Range, Manual Second (from Drive, Manual Third)
• Drive Range, Manual Third (from Overdrive Range)
• Manual First Gear
• Manual Second Gear
• Manual Third Gear
• Overdrive Range, 4-3 Downshift - Torque Converter Clutch Not Applied
• Overdrive Range, First Gear
• Overdrive Range, Fourth Gear - Torque Converter Clutch Applied
• Overdrive Range, Second Gear
• Overdrive Range, Third Gear - Torque Converter Clutch Not Applied
• Park or Neutral - Engine Running
• Reverse

All Special Tools and Equipment

• Special Tools

Cleaning, Inspection, and Adjustment

• Case Inspection
• Direct and Coast Clutch Functional Air Checks
• Input Carrier Pinion Gear Clearance Check
• Oil Pump Cleaning and Inspection
• Output Shaft Inspect
• Reaction Carrier Pinion Clearance Check
• Reverse Clutch Functional Air Check
• Second Clutch Functional Air Check
• Selective Washer Measurement and Installation

Disassembly, Overhaul, Repair, and Assembly

• Accumulator Spring Removal
• Accumulator Springs Installation
• Actuator Guide Replacement
• Automatic Transmission Fluid Filter, Seal, and Level Control Valve Removal
• Automatic Transmission Fluid Pan and Gasket Installation
• Automatic Transmission Fluid Pan and Gasket Removal
• Channel Plate and Gasket Removal
• Channel Plate Assembly Assemble
• Channel Plate Assembly Disassemble
• Channel Plate Assembly Installation
• Checkball Removal
• Checkballs Installation
• Control Valve Assembly and Transmission Fluid Pressure Switch Installation
• Control Valve Body Assemble
• Control Valve Body Assembly and Gasket Removal
• Control Valve Body Cover Removal
• Control Valve Body Disassemble
• Direct/Coast Clutch, Reaction Carrier Assemble
• Direct/Coast Clutch, Reaction Carrier Disassemble
• Direct/Coast Clutch, Reaction Carrier Installation
• Drive Sprocket Support Assemble
• Drive Sprocket Support Installation
• Drive Sprocket Support Removal
• Drive Sprocket, Driven Sprocket, and Drive Link Disassemble
• Drive Sprocket, Driven Sprocket, and Drive Link Installation
• Driven Sprocket Support Assembly Disassemble
• Driven Sprocket Support Assembly Installation
• Filter Assembly and Seal Installation
• Final Drive and Differential Assembly Install
• Final Drive Internal Gear Removal
• Forward Clutch Assembly Assemble
• Forward Clutch Assembly Disassemble
• Forward Clutch Assembly Installation
• Forward Clutch Support, Low Roller Clutch Assemble
• Forward Clutch Support, Low Roller Clutch Install
• Forward Clutch Support, Roller Clutch Disassemble
• Fretting Ring, Final Drive Internal Gear Install
• Input Internal Gear, Forward Clutch Hub Assemble
• Input Internal Gear, Forward Clutch Hub Disassemble
• Input Internal Gear, Forward Clutch Hub Install
• Input Speed Sensor Installation
• Input Speed Sensor Removal
• Intermediate Fourth Band Assembly Installation
• Intermediate/Fourth Servo Assemble and Installation
• Intermediate/Fourth Servo Disassemble
• Intermediate/Fourth Servo Removal
• Low and Reverse Servo Assemble and Installation
• Low and Reverse Servo Disassemble
• Low and Reverse Servo Removal
• Low/Reverse Band Installation
• Manual Shift Shaft Pin, Detent Lever, and Park Pawl Actuator Assembly Installation
• Manual Shift Shaft Pin, Detent Lever, and Park Pawl Actuator Assembly Removal
• Manual Valve Clip Removal
• Manual Valve Link Installation
• Oil Feed Pipes Assemble
• Oil Feed Pipes Removal
• Oil Level Control Valve Installation
• Oil Pump and Oil Pump Shaft Removal
• Oil Pump Assembly Installation
• Output Shaft Installation
• Output Speed Sensor Installation
• Output Speed Sensor Removal
• Reaction Internal Gear, Input Carrier Assemble
• Reaction Internal Gear, Input Carrier Disassemble
• Reaction Internal Gear, Input Carrier Installation
• Reverse Input and Second Roller Clutch Assemble
• Reverse Input and Second Roller Clutch Disassemble
• Reverse Input and Second Roller Clutch Installation
• Right Hand Axle Seal Assemble
• Right Hand Axle Seal Removal
• Second Clutch Plate Installation
• Side Cover/Gaskets, Disassemble, Assemble, Install
• Spacer Plate and Gasket Removal
• Spacer Plate and Gaskets Installation
• Stub Shaft Removal
• Stub Shaft Sleeve Assembly Installation
• Torque Converter Assembly Removal
• Torque Converter Installation
• Torque Converter Seal Installation
• Torque Converter Seal Removal
• Transmission Fluid Cooler Pipe Fitting Seal Installation
• Transmission Fluid Cooler Pipe Fitting Seal Removal
• Transmission Fluid Pressure Switch Removal
• Transmission Holding Fixture Assemble
• Wire Harness Disconnect
• Wiring Harness Assembly Connect
• Wiring Harness Connection
• Wiring Harness Removal

Mechanical Specifications

• End Play Specifications
• Fastener Tightening Specifications
• Fluid Capacity Specifications