Torque Dampener Housing Cleaning and Inspection for Chevrolet Chevy Suburban - 2WD 2008

Preliminary Procedures

1. Thoroughly clean the torque dampener housing assembly, including threads, with clean solvent.
2. Clean sealing surfaces.
3. Inspect all threaded holes. If necessary, repair any thread damage.

1

Input Shaft Bushing

2

Trans Fluid Cooler Pipe Fitting Seals (Qty: 2)

Notice: Refer to Seal Reuse Notice in the Preface section.

Tip
Refer to Transmission Fluid Cooler Pipe Fitting Seal Replacement .

3

Auxiliary Fluid Pump Sealing Surface

Tip
Clean any gasket material.