Engine Oil Level Sensor and/or Switch Replacement for Chevrolet Corvette 2007

1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Drain the engine of oil.
3. Disconnect the electrical connector (3).



4. Remove the engine oil lever sensor.

Notice: Refer to Fastener Notice in the Preface section.




1. Install the drain plug.

Tighten
Tighten the drain plug to 25 N·m (18 lb ft).

2. Install the engine oil level sensor.

Tighten
Tighten the engine oil level sensor to 35 N·m (26 lb ft).




3. Reconnect the electrical connector (3).
4. Lower the vehicle.
5. Refill the engine. Refer to Approximate Fluid Capacities .