Inside Air Temperature Sensor Replacement for Chevrolet Epica 2004

Caution: Refer to Battery Disconnect Caution in the Preface section.




1. Disconnect the negative battery cable.
2. Remove the instrument panel under cover. Refer to Instrument Cluster Trim Panel Replacement in Instrument Panel, Gages, and Console.
3. Remove the screws securing the in-car temperature sensor with the tube.

1. Install the in-car sensor.
2. Install the in-car sensor retaining screws and tighten.
3. Install the air inlet tube and connect the electrical connector.
4. Install the instrument panel under cover. Refer to Instrument Cluster Trim Panel Replacement in Instrument Panel, Gages, and Console.
5. Connect the battery negative cable.