GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Express - AWD 🢒 Power and Signal Distribution 🢒 Data Communications 🢒 Electronic Brake Control Module Programming and Setup

Electronic Brake Control Module Programming and Setup for Chevrolet Express - AWD 2009

EBCM Replacement

If the electronic brake control module (EBCM) is replaced, the following procedures must be performed:

  1. EBCM programming: Refer to Service Programming System (SPS).
  2. With a scan tool perform the yaw rate sensor recalibration and follow the on-screen instructions.