Engine Mount Replacement - Right Side for Chevrolet Impala 2008

1. Remove the engine mount strut. Refer to Engine Mount Strut Replacement .
2. Remove the right exhaust manifold. Refer to Exhaust Manifold Replacement - Right Side .
3. Remove the upper engine mount nuts.
4. Install the engine support fixture. Refer to Engine Support Fixture .
5. Using the engine support fixture, raise the engine .



6. Remove the engine mount bracket bolts.
7. Remove the engine mount bracket.
8. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .



9. Remove the lower engine mount nuts.
10. Remove the engine mount.

1. Install the engine mount.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the lower engine mount nuts.

Tighten
Tighten the nuts to 50 N·m (37 lb ft).

3. Lower the vehicle.



4. Install the engine mount bracket.
5. Install the engine mount bracket bolts.

Tighten
Tighten the bolts to 50 N·m (37 lb ft).




6. Using the engine support fixture, lower the engine .
7. Remove the engine support fixture.
8. Install the upper engine mount nuts.

Tighten
Tighten the nuts to 50 N·m (37 lb ft).

9. Install the right exhaust manifold. Refer to Exhaust Manifold Replacement - Right Side .
10. Install the engine mount strut. Refer to Engine Mount Strut Replacement .