Automatic Transmission Shift Lock Control Actuator Replacement for Chevrolet Malibu 2001

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.
2. Remove the center console. Refer to Console Replacement in Instrument Panel Gauges and Console.



3. Disconnect electrical connector from the shift lock control (2) for the automatic transmission (AT).



4. Remove both ends of the AT shift lock control from pivot points (1).

1. Install the upper clip of the AT shift lock control onto the upper pivot point, and the lower clip onto the lower pivot point.
2. Install the center console. Refer to Console Replacement in Instrument Panel, Gauges and Console.
3. Install the electrical connector to the AT shift lock control.
4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.