Automatic Transmission Mount Frame Bracket Replacement for Chevrolet Monte Carlo 1997

1. Raise and support the vehicle. Refer to

   Caution: To help avoid personal injury when a vehicle is on a hoist, provide additional support for the vehicle at the opposite end from which components are being removed. This will reduce the possibility of the vehicle falling off the hoist.

   in General Information.
2. Remove the left front tire and wheel assembly. Refer to Tires and Wheels.
3. Remove the left engine splash shield. Refer to Body Front End.
4. Use floor stands to support the transaxle.



5. Remove the transaxle mount frame bracket to the transaxle mount lower nuts. Refer to Transmission Mount Replacement .
6. Remove the transaxle mount frame bracket nuts.
7. Remove the transaxle mount frame bracket bolts.
8. Remove the transaxle mount frame bracket.

1. Position the transaxle mount frame bracket to frame.



2. Install the transaxle mount frame bracket bolts.
3. Install the transaxle mount frame bracket nuts on the bolts.

Tighten
Tighten the transaxle mount frame bracket bolts to 58 N·m (43 lb ft). Refer to

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

in General Information.
4. Install the transaxle mount frame bracket to the transaxle mount lower nuts. Refer to Transmission Mount Replacement .
5. Remove the support from the transaxle.
6. Install the left engine splash shield. Refer to Body Front End.
7. Install the left front tire and wheel assembly. Refer to Tires and Wheels.
8. Lower the vehicle.