Parking Brake Front Cable Replacement for Chevrolet S10 Pickup - 2WD 2003

1. Release the park brake, if applied.
2. Remove the left trim panel-knee bolster. Refer to Driver Knee Bolster Panel Replacement in Instrument Panel, Gages, and Console.
3. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.



4. Loosen the park brake cable at the equalizer.



5. Remove the front park brake cable from the connector.



6. Remove the retainer and the grommet.



7. Remove the front brake cable from the park brake pedal.
8. Remove the front park brake cable.

1. Install the front park brake cable in the connector.



2. Install the park brake cable in the retainer and grommet.
3. Install the park brake cable on the park brake pedal.



4. Install the left trim-panel knee bolster. Refer to Driver Knee Bolster Panel Replacement in Instrument Panel, Gages, and Console.
5. Adjust the park brake cable. Refer to Park Brake Adjustment .
6. Lower the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.