Rear Compartment Floor Rail Replacement for Chevrolet SSR 2005

1. Open the rear compartment lid.
2. Lower the endgate.
3. Remove the retainer clip from the backside of the liner.



4. Remove the retainers from the floor rail.



5. Remove the rear compartment floor rail from the vehicle.

1. Install the rear compartment floor rail to the vehicle.

Notice: Refer to Fastener Notice in the Preface section.




2. Install the retainers.

Tighten
Tighten the floor rail fasteners to 10 N·m (88 lb in).

3. Close the endgate.
4. Close the rear compartment lid.