Parking and Turn Signal Lamp Bulb Replacement for Chevrolet SSR 2006

1. Open the hood.
2. Remove the upper grille applique molding. Refer to Front Bumper Fascia Molding Replacement in Exterior Trim.
3. Remove the park/turn signal lamp from the vehicle. Refer to Parking and Turn Signal Lamp Replacement .



4. Remove the electrical connector from the park/turn signal lamp by rotating the connector counterclockwise.



5. Pull bulb out of electrical connector.

1. Install the bulb to the electrical connector by pressing until fully seated.



2. Install the electrical connector into the park/turn signal housing and turn the connector clockwise.
3. Install the park/turn signal lamp to the vehicle. Refer to Parking and Turn Signal Lamp Replacement .
4. Install the upper grille applique molding. Refer to Front Bumper Fascia Molding Replacement in Exterior Trim.
5. Close the hood.