Radio Antenna Module Replacement for Chevrolet SSR 2006

1. Remove the windshield garnish molding. Refer to Windshield Upper Garnish Molding Replacement in Interior Trim.



2. Remove the bolt securing the antenna module to the vehicle.
3. Disconnect the coax cable.
4. Disconnect the connector at the windshield.

1. Connect the connector at the windshield.
2. Connect the coax cable.

Notice: Refer to Fastener Notice in the Preface section.

3. Install the bolt securing the antenna module to the vehicle.

Tighten
Tighten the bolt to 9 N·m (80 lb in).

4. Install the windshield garnish molding. Refer to Windshield Upper Garnish Molding Replacement in Interior Trim.