Front Bumper Fascia Replacement for Chevrolet Spark 2005

Caution: Refer to Battery Disconnect Caution in the Preface section.




1. Disconnect the negative battery cable.

Caution: Refer to Vehicle Lifting Caution in the Preface section.

2. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
3. Remove the front wheels.
4. Remove the clip and bolts.
5. Remove the front wheelhouse splash shield.



6. Remove the bolts (1) on both side of the fascia.



7. Remove the clips (1) under the fascia.



8. Lower the vehicle.
9. Remove the front bumper spacer from the bumper. Refer to Front Bumper Upper Fascia Replacement .
10. Remove the front bumper fascia bolts (1).
11. Remove the clips (1).
12. Remove the front bumper fascia (2).
13. Remove the front fog lamps. Refer to Front Fog Lamp Replacement in Lighting Systems.

Notice: Refer to Fastener Notice in the Preface section.




1. Install the front fog lamps. Refer to Front Fog Lamp Replacement in Lighting Systems.
2. Install the bumper fascia.
3. Install the clips on the top of the fascia (1).
4. Install the bolts on the top of the fascia (2).
5. Install the front bumper spacer. Refer to Front Bumper Upper Fascia Replacement .

Caution: Refer to Vehicle Lifting Caution in the Preface section.




6. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
7. Install the clips (1) under the fascia.
8. Install the bolts on both sides of the fascia.
9. Install the front wheelhouse splash shields with the clips and the bolts.
10. Install the front wheels.
11. Lower the vehicle.
12. Connect the negative battery cable.