Vehicle Yaw Sensor with Vehicle Lateral Accelerometer Replacement for Chevrolet Uplander 2009

1. Remove the front floor console bracket assembly. Refer to Front Floor Console Bracket Assembly Replacement .



2. Disconnect the electrical connector (3) from the yaw rate sensor.
3. Remove the nuts (2) retaining the yaw rate sensor.
4. Remove the yaw rate sensor (1) from the console bracket.

1. Install the yaw rate sensor (1) to the console bracket.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the nuts (2) retaining the yaw rate sensor and tighten to 9 N·m (80 lb in) .
3. Connect the electrical connector (3) to the yaw rate sensor.
4. Install the front floor console bracket assembly. Refer to Front Floor Console Bracket Assembly Replacement .