Parking Brake Indicator Switch Replacement for Chevrolet Uplander 2009

1. Remove the left cowl side panel. Refer to Cowl Side Trim Panel Replacement .



2. Remove the park brake indicator switch electrical connector.
3. Remove the park brake indicator switch screw.
4. Remove the parking brake indicator switch.

1. Install the park brake indicator switch.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the park brake indicator switch screw and tighten to 3 N·m (27 lb in) .



3. Install the park brake indicator switch electrical connector.
4. Install the left cowl side panel. Refer to Cowl Side Trim Panel Replacement .