Mass Airflow Sensor Replacement for Chevrolet Uplander Ext. 2006

1. Turn OFF the ignition.



2. Disconnect the mass air flow (MAF) sensor electrical connector (1).
3. Remove the air inlet duct . Refer to Air Cleaner Inlet Duct Replacement .
4. Remove the MAF sensor (2) from the air filter housing.

1. Install the MAF sensor (2) to the air filter housing.
2. Install the air inlet duct . Refer to Air Cleaner Inlet Duct Replacement .
3. Connect the MAF sensor electrical connector (1).
4. Start and idle the engine.
5. Inspect the air intake duct for leaks.