Driver Information Center Replacement for Chevrolet Venture - 4WD 2003

1. Remove the overhead console. Refer to Roof Console Replacement in Interior Trim.



2. Remove the driver information display to overhead console screws.
3. Remove the driver information display from the overhead console.

1. Install the driver information display to overhead console.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the driver information display to overhead console screws.

Tighten
Tighten the screws to 1 N·m (9 lb in).

3. Install the overhead console. Refer to Roof Console Replacement in Interior Trim.
4. Calibrate the compass. Refer to Electronic Compass Calibration .