Ignition Coil Installation for Daewoo Lacetti (Global Delta) 2009
Special Tools
EN 49424 Remover and Installer Ignition Module
For equivalent regional tools, refer to
Special Tools.
Note: When installing a new DIS ignition module it is not necessary to replace the gaskets.
- Install the
EN 49424 remover / installer
.
- Install the ignition coil (1) and the NEW gaskets (2).
Caution: Refer to Fastener Caution in the Preface section.
Note: Note the arrow on the cover.
- Install the 2 ignition coil bolts an tighten to
8 N·m (71 lb in).
- Install the cover of the ignition coil in the direction of the arrow.