For 1990-2009 cars only
Diagnostic Instructions
| • | Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. |
| • | Review Strategy Based Diagnosis for an overview of the diagnostic approach. |
| • | Diagnostic Procedure Instructions provides an overview of each diagnostic category. |
DTC Descriptor
DTC P0219 00: Engine OverspeedCircuit/System Description
This diagnostic shows the technician when the engine speed was over the calibrated maximum.
Conditions for Running the DTC
| • | The engine is running. |
| • | The DTC runs continuously once the above condition is met. |
Conditions for Setting the DTC
Engine speed was above threshold.
Action Taken When the DTC Sets
DTC P0219 00 is a Type C DTC.
Conditions for Clearing the DTC
DTC P0219 00 is a Type C DTC.
Reference Information
Schematic Reference
Connector End View Reference
Electrical Information Reference
DTC Type Reference
Powertrain Diagnostic Trouble Code (DTC) Type Definitions
Scan Tool Reference
Control Module References for scan tool information
Circuit/System Testing
Observe the DTCs with the scan tool.
| ⇒ | If DTC P0219 00 is set, inform the customer that these extremely high rotations may cause mechanical damage. |
Repair Instructions
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.
