Parking Brake Indicator Switch Replacement for GMC Truck Savana 2009

1. Remove the left trim panel. Refer to Body Hinge Pillar Trim Panel Replacement.



2. Remove the electrical connector.
3. Remove the screw from the switch.
4. Remove the indicator switch from the vehicle.

1. Connect the indicator switch to the vehicle.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the screw to the switch and tighten to 4 N·m (35 lb in).
3. Install the electrical connector.
4. Install the left trim panel. Refer to Body Hinge Pillar Trim Panel Replacement.