New Product Information for GMC Truck Sierra Denali 2008
The purpose of New Product Information is to highlight, or indicate, important product changes from the previous model year.
Changes may include 1 or more of the following items:
| • | Torque values and/or fastener tightening strategies |
| • | Changed engine specifications |
| • | New sealants and/or adhesives |
| • | Disassembly and assembly procedure revisions |
| • | Engine mechanical diagnostic procedure revisions |
| • | New special tools required |
| • | A component comparison from the previous year |
Changed Engine Specifications
No revisions to the engine specifications.
Torque Values and/or Fastener Tightening Strategies
Connecting rod bolt torques have been increased. Refer to
Fastener Tightening Specifications
.
New Sealants and/or Adhesives
Sealers and adhesives, as required, are identified within the specific service procedures. Refer to
Adhesives, Fluids, Lubricants, and Sealers
.
Disassembly and Assembly Procedure Revisions
No disassembly or assembly procedure revisions.
Engine Mechanical Diagnostic Procedure Revisions
Diagnosis on a vehicle should follow a logical process. Strategy based diagnostics is a uniform approach for repairing all systems. The diagnostic flow may always be used in order to resolve a system condition. The diagnostic flow is the place to start
when repairs are necessary. For a detailed explanation, refer to
Diagnostic Starting Point - Engine Mechanical
.
New Special Tools Required
No new special tools are required.
A Component Comparison from the Previous Year
| • | No new engines/RPOs have been added. |
| • | Second design engines will use a rivet-type plug replacing the coolant air bleed covers located at the top rear of each cylinder head. To properly repair a leaking plug, remove cylinder head from the engine, remove the plug from the cylinder head
and install first design coolant air bleed cover and bolt. |
