Hood Handle Replacement for HUMMER H2 2003

1. Open the hood.
2. Remove the hood insulator. Refer to Hood Insulator Replacement .



3. Remove the fasteners (1) retaining the hood handle to the hood.
4. Remove the hood handle (2) from the hood.

Notice: Refer to Fastener Notice in the Preface section.

1. Align the hood handle to the hood.



2. Install the fasteners (1) retaining the hood handle to the hood.

Tighten
Tighten the fasteners to 9 N·m (80 lb in).

3. Install the hood insulator. Refer to Hood Insulator Replacement .
4. Close the hood.