GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2003 🢒 H2 🢒 Body and Accessories 🢒 Doors 🢒 Rear Side Door Trim Panel Replacement

Rear Side Door Trim Panel Replacement for HUMMER H2 2003

Tools Required

J 38778 Door Trim Pad Clip Remover

Removal Procedure

    Object Number: 922455 Size: SH
  1. Remove the upper door trim panel. Refer to Upper Extension Trim Panel Replacement .
  2. Remove the rear door handle bezel. Refer to Rear Door Inside Handle Bezel Replacement
  3. Remove the door panel retaining screw located in the handle bezel opening.
  4. Use J 38778 to release the retaining clips from the door trim panel.
  5. Disconnect the electrical wiring harness connectors.
  6. Remove the door trim panel from the vehicle.
  7. Inspect for missing or broken retaining fasteners. Replace the fasteners as necessary.

Installation Procedure

    Object Number: 922455 Size: SH
  1. Connect the electrical wiring harness connectors.
  2. Install the door trim panel to the vehicle.
    3. 2.1. Align the door trim panel retaining clips with the openings in the door.
    2.2. Push inward on the door trim panel to engage the fasteners.
  3. Install the door panel retaining screw.
  4. Install the rear door handle bezel. Refer to Rear Door Inside Handle Bezel Replacement .
  5. Install the upper door trim panel. Refer to Upper Extension Trim Panel Replacement .