Driver Knee Bolster Panel Replacement for HUMMER H2 2007

1. Loosen and move the reward center console for access to the knee bolster bolt. Refer to Console Replacement .
2. Remove the instrument panel cluster (IPC) trim. Refer to Instrument Cluster Trim Panel Replacement .



3. Remove the screws/bolts that hold the knee bolster trim panel to the I/P.
4. Remove the knee bolster trim.

1. Install the knee bolster trim panel to the I/P.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the knee bolster trim panel screws.

Tighten
Tighten the screws to 2 N·m (18 lb in).

3. Install the IPC trim. Refer to Instrument Cluster Trim Panel Replacement .
4. Align and move the forward center console in place and fasten to the center console bracket. Refer to Console Replacement .