Transfer Case Rear Output Shaft Speed Sensor Replacement - Right Side for Isuzu Ascender - 4WD 2007

1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .



2. Remove the transfer case right rear speed sensor electrical connector.
3. Remove the transfer case right rear speed sensor.

Notice: Refer to Fastener Notice in the Preface section.




1. Install the transfer case right rear speed sensor.

Tighten
Tighten the sensor to 17 N·m (13 lb ft).

2. Install the transfer case right rear speed sensor electrical connector.
3. Lower the vehicle. Refer to Lifting and Jacking the Vehicle .