Crankshaft Front Oil Seal Replacement for Isuzu Ascender - 4WD 2008

Tools Required

J 44218 Seal Installer

Important: Do not damage the engine front cover or the crankshaft.

1. Remove the crankshaft balancer. Refer to Crankshaft Balancer Replacement .



2. Pry out the crankshaft front oil seal using a suitable tool. Use the provided slots for prying out the seal.

1. Apply the engine oil to the outside diameter of the crankshaft front oil seal.



2. Use the J 44218 to install the front oil seal.
3. Remove the J 44218 .
4. Install the crank balancer shaft. Refer to Crankshaft Balancer Replacement .