Air Inlet Actuator Replacement for Oldsmobile Intrigue 2000

1. Remove the instrument panel compartment. Refer to Instrument Panel Compartment Replacement in Instrument Panel, Gauges and Console.
2. Remove the right instrument panel insulator. Refer to Instrument Panel Insulator Replacement in Instrument Panel, Gauges and Console
3. Remove the vacuum electrical solenoid. Refer to Vacuum Electrical Solenoid Replacement in Manual HVAC Systems or Vacuum Electrical Solenoid Replacement in Automatic HVAC Systems.
4. Disconnect the vacuum line from the air inlet vacuum actuator.
5. Lift to release the air inlet vacuum actuator retaining tab and slide off mounting bracket.



6. Disconnect the vacuum actuator plunger rod from the air inlet valve lever and remove the air inlet vacuum actuator.

1. Connect the air inlet vacuum actuator plunger rod to the air inlet valve, then extend the plunger.

Important: During installation, ensure that the air inlet vacuum actuator retaining tab is positioned above the mating base on the HVAC control module case.

2. Push the vacuum actuator toward the HVAC control module case to secure the retaining tab.

Important: Check that the vacuum actuator pushrod is not binding on the air inlet lever.

3. Connect the vacuum harness connector to the air inlet vacuum actuator.
4. Install the vacuum electrical solenoid. Refer to Vacuum Electrical Solenoid Replacement in Manual HVAC Systems or Vacuum Electrical Solenoid Replacement in Automatic HVAC Systems.
5. Install the instrument panel compartment. Refer to Instrument Panel Compartment Replacement in Instrument Panel, Gauges and Console.
6. Install the right instrument panel insulator. Refer to Instrument Panel Insulator Replacement in Instrument Panel, Gauges and Console.