For 1990-2009 cars only

Makes 🢒 Opel 🢒 2009 🢒 GT 🢒 Body Hardware and Trim 🢒 Instrument Panel and Console Trim 🢒 Control Lever and/or Boot Replacement

Control Lever and/or Boot Replacement for Opel GT 2009

Callout	Component Name
1	Shift Boot Bezel Tip Grasp the edge of the shift boot bezel by reaching under the bezel from the soft boot area. Lift the shift boot bezel up to release the bezel from the instrument panel cluster trim plate.
2	Shift Control Lever Retaining Screw Caution: Refer to Fastener Caution in the Preface section. Tip Lift the shift boot up for access. It is not necessary to fully remove the screw in order to release the control lever. Ensure the screw is lined up with the flat on the transmission shift lever before tightening. Tighten 10 N·m (89 lb in)
3	Shift Control Lever Knob and Boot Tip The shift control lever knob and boot must be replaced as an assembly.

Callout

Component Name

Shift Boot Bezel

Tip
Grasp the edge of the shift boot bezel by reaching under the bezel from the soft boot area. Lift the shift boot bezel up to release the bezel from the instrument panel cluster trim plate.

Shift Control Lever Retaining Screw

Caution: Refer to Fastener Caution in the Preface section.

Tip

Lift the shift boot up for access.
It is not necessary to fully remove the screw in order to release the control lever.
Ensure the screw is lined up with the flat on the transmission shift lever before tightening.

Tighten
10 N·m (89 lb in)

Shift Control Lever Knob and Boot

Tip
The shift control lever knob and boot must be replaced as an assembly.