Engine Oil Cooler Replacement for Pontiac G5 2007

1. Drain the charged air cooling system. Refer to Charge Air Cooling System Draining and Filling .



2. Remove the oil pressure sensor (1).
3. Disconnect the oil cooler hoses (2).
4. Remove the oil cooler stud (3) and the oil cooler bolts (4).
5. Remove the oil cooler.

1. Install the oil cooler.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the oil cooler bolts (4) and stud (3).

Tighten
Tighten the bolts and stud to 22 N·m (16 lb ft).

3. Connect the oil cooler hoses (2).
4. Install the oil pressure sensor (1).

Tighten
Tighten the sensor to 22 N·m (16 lb ft).

5. Fill the charged air cooling system. Refer to Charge Air Cooling System Draining and Filling .