Transmission Fluid Filler Tube Replacement for Pontiac G6 2009

1. Remove the transaxle oil level indicator.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
3. Remove the catalytic converter from the exhaust manifold. Refer to Catalytic Converter Replacement - Right Side.



4. Remove the fluid filler tube bracket bolt.
5. Remove the fluid filler tube.

Note: Do NOT place the fluid filler tube seal on the fluid filler tube when installing the tube or damage to the seal will result.

1. Install the fluid filler tube seal in the transaxle.
2. Position the fluid filler tube.

Caution: Refer to Fastener Caution in the Preface section.

3. Install the fluid filler tube bracket bolt.

Tighten
Tighten the bolt to 13 N·m (115 lb in).

4. Install the catalytic converter. Refer to Catalytic Converter Replacement - Right Side.
5. Lower the vehicle.

Caution: Refer to Transmission Overfill Caution in the Preface section.

6. Check and fill the transaxle as necessary.
7. Install the transaxle oil level indicator.
8. Inspect for fluid leaks.