Temperature Valve Actuator Replacement - Right Side for Pontiac G8 2009

1. Remove the air inlet assembly. Refer to Air Inlet Assembly Replacement.



2. Disconnect the right air temperature actuator electrical connector (1).



3. Remove the right air temperature actuator to HVAC module assembly retaining screws (1).
4. Remove the right air temperature actuator (2) from the HVAC module assembly (3).

1. Install the right air temperature actuator (2) to the HVAC module assembly (3).

Caution: Refer to Fastener Caution in the Preface section.

2. Install the right air temperature actuator to HVAC module assembly retaining screws (1) and tighten to 1 N·m (9 lb in).



3. Connect the right air temperature actuator electrical connector (1).
4. Install the air inlet assembly. Refer to Air Inlet Assembly Replacement.
5. Perform HVAC system relearn. Refer to HVAC Control Module Programming and Setup.