Cruise Control Module Replacement for Pontiac Grand Prix 1999

Important: The cruise control module is mounted to the left strut tower. Service the cruise control module as a complete unit.

1. Remove the cruise control cable from the cruise control module. Refer to Cruise Control Cable Replacement or Cruise Control Cable Replacement .
2. Disconnect the cruise control module electrical connector from the cruise control module.



3. Remove the cruise control module to the shock tower nuts.

1. Install the cruise control module on the mounting studs.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the cruise control module to the shock tower nuts.

Tighten
Tighten the cruise control module nuts to 2 N·m (18 lb in).




3. Connect the cruise control module electrical connector to the cruise control module.
4. Install the cruise control cable to the cruise control module. Refer to Cruise Control Cable Replacement or Cruise Control Cable Replacement .
5. Adjust the cruise control cable. Refer to Cruise Control Cable Adjustment or Cruise Control Cable Adjustment .