Stabilizer Shaft Link Replacement for Pontiac Pursuit 2005

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
2. Remove the front wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.



3. Disconnect the stabilizer link from the stabilizer shaft.



4. Disconnect the stabilizer link from the strut assembly and remove from the vehicle.

Notice: Refer to Fastener Notice in the Preface section.




1. Connect the stabilizer link to the strut assembly.

Tighten
Tighten the stabilizer link nut to 65 N·m (48 lb ft).




2. Connect the stabilizer link to the stabilizer shaft.

Tighten
Tighten the stabilizer link nut to 80 N·m (59 lb ft).

3. Install the front wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
4. Lower the vehicle.