GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 Sunfire 🢒 Body 🢒 Wipers/Washer Systems 🢒 Windshield Wiper Motor Cover Replacement

Windshield Wiper Motor Cover Replacement for Pontiac Sunfire 2005

Removal Procedure
  1. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.

    2. Object Number: 1194806 Size: SH
  2. Remove the wiper motor cover screws.
  3. Remove the wiper motor cover from the wiper motor.
  4. Disconnect the wiper motor electrical connector.

Installation Procedure

    Object Number: 1194807 Size: SH
  1. Apply RTV Sealer in the seal channel of the wiper motor cover.

    2. Object Number: 1194806 Size: SH
  2. Position the wiper motor cover onto the wiper motor.
  3. Connect the wiper motor electrical connector.

    4. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the wiper motor cover screws.

    5. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  5. Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.
  6. Inspect the wipers for proper operation.